- Secure order
- Easy return shipment
- Service-Hotline +41 71 511 23 70
The casting mould "jewellery design" made of high-quality, flexible silicone has a size of approx. 11.3 x 15.5 cm with a height of approx. 0.8 cm. For casting 12 geometric pendants. The size is between approx. 2,4 - 3,9 cm. In total, the filling quantity with resin is approx. 40 ml.
The special silicone material is ideal for epoxy resins and allows easy demoulding of the decoration pendant. A super silicone mould that can be poured with plaster and waxed concrete in addition to casting resin. The sparkling shine is maintained by the fineness of the mold. From square to round to oval pendants, there are many different shapes available in a variety of sizes. Most shapes have a recess for an eyelet with a Ø of approx. 1 - 4 mm.
Super to make filigree chain pendants, earrings or key rings. The resin can be individually coloured with tinting colours. The decoration pendant are especially pretty with sequins, dried flowers and glitter. Very personal and just great to give away.
Tips to use:
Preparations:
Mix the desired casting compound according to the instructions. If you wish, you can color it with color pigment powder.
Application:
Slowly pour the mixed casting compound into the casting mould. Leave a rim of at least 2 mm free to make it easier to demould your casting later.
Gently tap the casting mould so that the mixture is evenly distributed and any air bubbles come to the surface. You can then prick these with a lace object.
Time to dry:
Allow the casting compound to harden well. Follow the drying times specified in the instructions for the casting compound.
Work to finish:
You can now demould your casting. If the casting does not come off simply by dropping it, you can carefully loosen the mould all around with your fingers and tap it against the mould.
Good to know:
For detailed moulds, we recommend using a mould release agent or release wax to protect the mould.
