Oval pendants:

For the pendant, bend a longer form with eyelets out of 2 mm thick aluminium wire, then wrap one side tightly with enamelled copper wire.

Wind a pin bead and tightly wrap the wire on the second side.

Repeat this 4 times alternately.

Pull the leather strap through the eyelet and close the ends with an overhand knot.

Cut the second leather strap in the middle, put the two halves together and knot them on the second eyelet. Thread the 4 leather bands with beads and eyelets and knot the leather band.

Round pendants

For the trailer, bend a round shape out of 2 mm thick aluminium wire, bend the projection by 90 degrees and turn it to the eyelet, then wrap the ends as tightly as possible with the enamelled copper wire.

Form 2 spirals from the aluminium wire; hold the aluminium wire in the middle with the round nose pliers and turn the first small spiral from the inside outwards, then form the second spiral from Starting at the end of the wire. Connect the two Wire forms together and fix it with enamelled copper wire into the round shape.

In several steps thread Acrylic-beads and eyelets and fix them to the spirals.

At the end pull the leather strap through the eyelet and close the ends with an overhand knot.

Creoles

Cut the aluminium wire to the same length and form two spirals

Then fasten the spirals and Creoles with enamelled copper wire.