Herzige Notiztafel im Fadenspann-Design
Anleitung No. 764And so it goes:
Transfer the outline of the decorative sign to the back of the fabric with the line-ex-pen.
Use a ruler to mark and connect points around the heart with a 1 cm distance to the inside. Cut out the heart with the fabric scissors. Prime the decorative sign in white
Tip: As MDF is very absorbent, it is easiest to Paint sponge dab the paint on in several layers.
After drying, glue the heart of the fabric in the Handicraft glue middle of the MDF heart. Apply the glue first in the middle and spread it out, place the fabric on top and then apply the glue along the edge with a brush.
Glue the shiny cord along the edge of the fabric with lightning adhesive gel. Hammer the decoration-Pins into the shiny cord with a 2 mm gap.
Important: Place a board underneath so that the needle tips do not damage the worktop.
Tip: If you hold the Needles needle tips with a pair of crafting pliers, they will all automatically have the same height.
Fix the shining cord to a needle with a knot and stretch it over the entire surface, using approximately every second needle.
Fix the beginning and the end of the shining cord with hot glue at the corresponding needle and cut it short.
Transfer the decorative sign to red Textile felt and cut out.
Put the shiny cord as a hanger between the felt heart and the decorative shield and join them together with hot glue.
Title: Hot Glue When working with hot glue I always use disposable gloves |